GME Network  |  J-Body Organization  -  Ecotec Power  -  GM Delta
The J-Body Organization
Log In
 you are here: / home / faq
Monday, January 5, 2009 
REGISTER NOW

FAQ Library

Search:  

FAQ Home Glossary

Engine / Performance

How do the TPS Tec and Venom 400 work?
The TPS Tec and Venom 400 are both electronic 'hacks' that plug into various sensors, and work quite...
   01-24-2005
What about underdrive pulleys?
Lightened pulleys underdrive the accessories driven by the drive belt by changing the diameter of th...
   01-01-2004
What about aftermarket engine/transmission mounts?
If you've ever watched your engine move around in the engine bay when you blip the throttle, you kno...
   01-01-2004
How much can I over-bore the existing engine?
It really depends on how much work you're looking to do. Mantapart has a 2.6L stroker kit available ...
   03-18-2006
What about changing the head/compression?
It is possible to mate a 2.3L engine head with a 2.4L block, but it is not a direct bolt-on installa...
   01-01-2004
How does the 2.3L HO engine put out 180hp?
No balance shafts, 10:1 compression pistons (2.4 have 9.5:1), Differnet camshafts, Smaller pulley, B...
   01-01-2004
Autometer Oil Pressure Gauge Installation
(This installation is for the 2.4L LD9 engine) Parts Required Brass Adapters 1 1/8" male to 1/4...
   01-31-2005
Exhaust theory and design
Dispelling the "backpressure" myth... The following excerpts are from Jay Kavanaugh, a turbosystems...
   04-28-2005
Is my car OBD1 or OBD2?
OBD = On Board Diagnostics All J-cars up to 1994 are OBD1. Most J-cars in 1995 are OBD1; 2.3L man...
   05-16-2005
Can I swap a different engine into my car?
Yes, absolutely. The limiting factors are usually cost and time, followed by availability of parts a...
   12-27-2005
Can I chip my car?
Yes and no, depending on the year of your car. Any first or second gen J-body can be "chipped" by r...
(not rated)   12-27-2005
Where is my ECU located?
The ECU or PCM or engine computer (whatever you want to call it) location varies from year to year. ...
(not rated)   12-27-2005
How do I swap an Ecotec engine into my 95-99 J-body?
Basically, you gut the entire car down to the frame and swap everything over. Did I say everything? ...
   01-10-2006
What are the "secret cams"?
The "secret cam swap" for the 96-02 2.4L Twin Cam (LD9) motor was pioneered back in 2001 by a few gu...
   12-03-2006
What is the top speed of a J-body?
Third-gen J-body cars have an electronic limiter that limits them to 108 MPH or 178 KM/H. Of course...
   03-18-2006
Alcohol/water injection
Well there seems to be alot of guys getting into the alcohol stuff so i put this togeather for you g...
   05-30-2006

Subcategories

[ home | regions | premium membership | members | library | faq ]
[ events calendar | gallery | chat | classifieds | store ]
[ forums | links | teams/clubs | contact us ]

TERMS OF SERVICE   PRIVACY POLICY